To Configure The Call Forward Mode Via Web User Interface; To Enable Call Forward In Phone Mode - Yealink SIP-T42G User Manual

You can enable/disable call forward for the phone, or you can customize call forward for
each or all accounts. Two call forward modes:
Phone (default): Call forward is effective for the phone system.

Custom: Call forward can be configured for each or all accounts.


To configure the call forward mode via web user interface:

1. Click on Features->Forward & DND.
2. In the Forward block, mark the desired radio box in the Mode field.
3. Click Confirm to accept the change.
Note
Call forward mode is configurable via web user interface only.

To enable call forward in phone mode:

1. Press Menu->Features->Call Forward.
2. Press
soft key.
3. Depending on your selection:
a.) If you select Always Forward:
1) Press
Forward field.
or to select the desired forwarding type, and then press the Enter
or , or the Switch soft key to select Enable from the Always
Basic Call Features
81