System Components - Tyco iSTAR eX Installation And Configuration Manual

System Components

NOTE
NOTE
The iSTAR eX hardware components are housed in a 16-gauge sheet metal
cabinet with a lockable door. The cabinet can be wall mounted.
iSTAR eX hardware components consist of:
iSTAR eX GCM – an embedded microprocessor-based general controller
board. The GCM board provides inputs, relay outputs, open collector
outputs, and Wiegand reader ports.
PMB – a board that provides power management, backups, and RM
reader ports for RM readers, I/8s, and R/8s.
ESD Power Supply - UL Recognized ESD, Model SPS-6.5
12 VDC, 17.2 Ah minimum capacity standby battery
LCD - displays diagnostic and status information
The STAREX004-64NPS and STAREX008-64NPS do not contain the ESD
power supply and the 17.2 Ah minimum capacity standby battery.
Figure 1.1 shows the standard iSTAR eX hardware and cabinet.
Figure 1.1 is not applicable for the NPS configuration.
iSTAR eX Installation and Configuration Guide
iSTAR eX Features
1–5