Tyco iSTAR eX Installation And Configuration Manual page 162

Configuring a Controller
5–28 iSTAR eX Installation and Configuration Guide
Section
a
Web Diagnostics
a
SNMP
a. This feature applies only to iSTAR controllers running firmware version 4.0.0
or greater.
Table 5.9: Advanced Tab
Description
Select the Enabled option to allow viewing of Web
Diagnostic pages for the selected controller.
Clear the Enabled option to prevent viewing of Web
Diagnostic pages for the selected controller.
See Chapter 6, "iSTAR Web Page Diagnostic Utility"," for
more information on Web Diagnostics.
Select the Enabled option to enable SNMP. You can then
define security levels for up to two community names,
Clear the Enabled option to disable SNMP.