Configuring Controllers; Viewing Controller Status; Istar Web-Based Diagnostic Utility - Tyco iSTAR eX Installation And Configuration Manual

iSTAR eX Tools

iSTAR Web-Based Diagnostic Utility

NOTE
1–26 iSTAR eX Installation and Configuration Guide

Configuring Controllers

Use the ICU to configure a controller's IP addresses, connection type, and
identity information.
You can also use the ICU to change a controller's identity, for example, from
master to member, and to modify a controller's IP addresses.
At system startup, the C•CURE host downloads IP address information to
the master. To ensure proper configuration, the information that you enter
in the ICU must match the information that you configure in C•CURE.

Viewing Controller Status

If a controller in the ICU's subnet is powered on, the utility displays the
following information for the controller:
MAC address
Name
IP address
Parent's IP address (either the host or master controller IP address)
Type of controller
Connection status
The Web-based Diagnostic Utility permits using the Web to view iSTAR eX
status and diagnostics information from any networked computer. The iSTAR
web-based diagnostic utility provides:
Password protection
Internet access to iSTAR eX controllers
Diagnostic tools for troubleshooting and monitoring system activity
The iSTAR Web-Based Diagnostic Utility has not been evaluated by UL.