Table of Contents
Advertisement
To configure tamper, power fail and low battery
1. Select Hardware>Controller in the Administration application.
2. Create or edit an iSTAR eX controller.
3. Select the Main Board tab and configure the Special Purpose Inputs.
NOTE
The Tamper, Low battery, and AC power fail inputs must be enabled to
report for compliance with UL requirements.
Figure 4.6: iSTAR eX Controller Special Purpose Inputs
iSTAR eX Installation and Configuration Guide
Connecting to the Host
4–11
- Quick Links:
- Istar Ex General Controller Module (Gcm)
- Icu
Hide quick links:
Advertisement
Table of Contents
