Tyco iSTAR eX Installation And Configuration Manual page 182

Viewing the Status Screen
6–6 iSTAR eX Installation and Configuration Guide
Table 6.1: Status Information Description (Continued)
Item
GMT Date / Time
DST
Boot Date / Time
Elapsed Time Since Boot
Total Program Memory
Free Program Memory
Percent Free
Total Storage Memory
Free Storage Memory
Total Physical Memory
Master (or Host)
Connection Status
Path to Host
Active Communication
Type
Secondary
Communication Type
Meaning
The date and time expressed in Greenwich Mean
Time or Universal Time. This value is reported each
time the controller is queried, and it is necessary to
click the browser's Refresh button to update it.
YES or NO indicates whether or not the controller
automatically adjusts the local time setting for
Daylight Savings Time when it is in effect.
The GMT date and time at which the controller was
last booted.
The amount of time that has passed since the system
was booted.
The total amount of controller flash ROM memory, in
bytes.
The number of bytes of controller flash ROM memory
not in use.
The percentage of controller flash ROM memory not
in use.
The total amount of SDRAM available for C•CURE
access control data.
The amount of free SDRAM available for C•CURE
access control data.
The amount of SDRAM available on the controller.
The status of the connection to the master controller
(for members) or to the host (for masters).
Yes or No indicates whether or not the controller has
a communications path to the C•CURE host.
The communication interface that is currently active.
Type of communication for secondary connection
between the controller and host. This is shown only if
a secondary connection was configured for the
controller.