Tyco iSTAR eX Installation And Configuration Manual page 190

Diagnostic Screens
6–14 iSTAR eX Installation and Configuration Guide
To use the ICU to display diagnostic messages
1. In the ICU main window, highlight the controller you selected in the Web
Page Diagnostic Utility, right-click, and select Real Time Monitor from
the drop-down menu.
The Set Diagnostic Levels window displays.
2. Click OK to display the message levels you selected in the Web Page
Diagnostic Utility
- or -
Select new levels by checking items on the Set Diagnostic Level dialog
box.
3. Exit by selecting Edit and Clear levels on exit to stop diagnostic
recording.
Because diagnostics can slow system performance, Software House
recommends that you use them only as necessary.