Pmb Connections - Tyco iSTAR eX Installation And Configuration Manual

S1-1
S1-2
S1-3
S1-4

PMB Connections

The connection is through S1, which is factory preset, as shown in Table 4.1.
Table 4.1: RS-485 Direction Switch for COM1 and COM2
Off
Read1 to COM2.
Read2 to COM2.
Read3 to COM2. (Default)
Read4 to COM2. (Default)
Figure 4.12 shows the iSTAR eX-PMB connections.
On
Read1 to COM1. (Default)
Read2 to COM1. (Default)
Read3 to COM1.
Read4 to COM1.
iSTAR eX Installation and Configuration Guide
iSTAR eX Connections
4–19