Tyco iSTAR eX Installation And Configuration Manual page 157

Configuring a Controller
If a controller is not configured, the ICU displays:
• Last six nibbles of the controller's MAC address
• "0.0.0.0" for the controller's IP address
• "Disconnected" icon ( , , , or )
• "Broadcasting for..." for Status
Figure 5.7: ICU Main Window Messages
3. Use one of the following methods to open the Controller dialog box for a
given controller:
• Double-click the controller.
• Highlight the controller, right-click, and choose Edit Controller
Information from the drop down menu.
• From the Main Menu bar, select Edit and choose Controller.
• Click the Edit Controller icon.
iSTAR eX Installation and Configuration Guide 5–23