Rack Latches Replacement; Remove The Rack Latches - Lenovo thinksystem SR630 Maintenance Manual

Before installing the air baffle, if you want to install a RAID super capacitor module on the bottom of the air
baffle, install it first. See "Install a RAID super capacitor module on the bottom of the air baffle" on page 105.
To install the air baffle, complete the following steps:
Watch the procedure. A video of the installation process is available:
• Youtube:
https://www.youtube.com/playlist?list=PLYV5R7hVcs-C_GGjNudxYy8-c69INMcmE
• Youku:
http://list.youku.com/albumlist/show/id_50462008
Figure 29. Air baffle installation
Step 1. Align the tabs on both sides of the air baffle with the corresponding slots on both sides of the
chassis.
Step 2. Lower the air baffle into the chassis and press the air baffle down until it is securely seated.
After installing the air baffle:
1. If there is a RAID super capacitor module installed on the bottom of the air baffle, connect it to the RAID
adapter with the extension cable that comes with the RAID super capacitor module.
2. Complete the parts replacement. See "Complete the parts replacement" on page 141.

Rack latches replacement

Use this information to remove and install the rack latches.

Remove the rack latches

Use this information to remove the rack latches.
46
ThinkSystem SR630 Maintenance Manual