Install The Rack Latches - Lenovo thinksystem SR630 Maintenance Manual
Hide thumbs
Also See for thinksystem SR630:
- Maintenance manual (276 pages) ,
- Product manual (75 pages) ,
- Quick start (2 pages)
Table of Contents
Advertisement
If you are instructed to return the old rack latches, follow all packaging instructions and use any packaging
materials that are provided.
Install the rack latches
Use this information to install the rack latches.
To install the rack latches, complete the following steps:
Watch the procedure. A video of the installation process is available:
• Youtube:
https://www.youtube.com/playlist?list=PLYV5R7hVcs-C_GGjNudxYy8-c69INMcmE
• Youku:
http://list.youku.com/albumlist/show/id_50462008
Step 1.
On each side of the server, align the rack latch with the pin on the chassis. Then, press the rack
latch onto the chassis and slightly slide it forward as shown.
Figure 33. Rack latch installation
Step 2.
Install the two screws to secure the rack latch on each side of the server.
.
Chapter 3
Hardware replacement procedures
49
Advertisement
Table of Contents
