Rack Latches Replacement - Lenovo ThinkSystem SR635 V3 User Manual

• Prevent exposure to static electricity, which might lead to system halt and loss of data, by keeping static-
sensitive components in their static-protective packages until installation, and handling these devices with
an electrostatic-discharge wrist strap or other grounding system.
• Before installing the PIB board, touch the static-protective package that contains the new PIB board to
any unpainted surface on the outside of the server. Then, take the new PIB board out of the package and
place it on a static-protective surface.
• Before installing the PIB board, ensure that the system board assembly is removed out of the chassis first.
See: "Remove the system I/O board or processor board" on page
To install the PIB board, complete the following steps:
Watch the procedure
A video of this procedure is available at YouTube:
DrpxDWLMfgtXO4O6BVYTim
Figure 99. PIB board installation
Step 1. Align the PIB board with the connector on the processor board, and use both hands to push the
PIB board and slightly insert it into the connector.
Step 2. Install the two screws to secure the PIB board.
After installing the PIB board:
1. Install the system board assembly into the chassis. See
board" on page 203.
2. Push the power supplies into the bays until they click into place.
3. Complete the parts replacement. See

Rack latches replacement

Use this information to remove and install the rack latches.
ThinkSystem SR635 V3 User Guide
156
https://www.youtube.com/playlist?list=PLYV5R7hVcs-
.
"Complete the parts replacement" on page
199.
"Install the system I/O board or processor
215.