Install A System Fan - Lenovo thinksystem SR630 Maintenance Manual

Before removing a system fan, remove the top cover. See "Remove the top cover" on page 42.
To remove a system fan, complete the following step:
Watch the procedure. A video of the removal process is available:
• Youtube: https://www.youtube.com/playlist?list=PLYV5R7hVcs-C_GGjNudxYy8-c69INMcmE
• Youku:
http://list.youku.com/albumlist/show/id_50462008
Figure 41. System fan removal
Step 1. Grasp the fan tabs on both ends of the system fan and carefully lift the system fan out of the server.
After removing the system fan:
• Install a new system fan. See "Install a system fan" on page 55.
• If you are instructed to return the old system fan, follow all packaging instructions and use any packaging
materials that are provided.

Install a system fan

Use this information to install a system fan. You can install a hot-swap fan without powering off the server,
which helps you avoid significant interruption to the operation of the system.
S033
. 55
Chapter 3 Hardware replacement procedures