Install The Tcm (For China Only) - Lenovo thinksystem SR630 Maintenance Manual

Figure 78. TCM removal
Step 1. Locate the TCM connector on the system board.
Step 2. Press and hold the release latch, and then lift the TCM straight up.
Note: Carefully handle the TCM by its edges.
If you are instructed to return the old TCM, follow all packaging instructions and use any packaging materials
that are provided.

Install the TCM (for China only)

Use this information to install the TCM.
Before installing the TCM, touch the static-protective package that contains the new TCM to any unpainted
surface on the outside of the server. Then, take the new TCM out of the package and place it on a static-
protective surface.
To install the TCM, complete the following steps:
Watch the procedure. A video of the installation process is available:
• Youtube: https://www.youtube.com/playlist?list=PLYV5R7hVcs-C_GGjNudxYy8-c69INMcmE
.
Chapter 3 Hardware replacement procedures
89