Lenovo thinksystem SR630 Maintenance Manual page 111

Hide thumbs Also See for thinksystem SR630:
Table of Contents

Advertisement

Figure 95. M.2 drive slot
To install the M.2 backplane and M.2 drive, complete the following steps:
Watch the procedure. A video of the installation process is available:
• Youtube:
https://www.youtube.com/playlist?list=PLYV5R7hVcs-C_GGjNudxYy8-c69INMcmE
• Youku:
http://list.youku.com/albumlist/show/id_50462008
Figure 96. M.2 drive installation
Step 1.
Insert the M.2 drive at an angle of approximately 30 degrees into the connector.
Note: If your M.2 backplane supports two M.2 drives, insert the M.2 drives into the connectors at
both sides.
Step 2.
Rotate the M.2 drive down until the notch
Step 3.
Slide the retainer forward (toward the connector) to secure the M.2 drive into place.
Attention: When sliding the retainer forward, ensure that the two nubs
small holes
4
on the M.2 backplane. Once they enter the holes, you will hear a soft "click" sound.
1
Slot 0
2
Slot 1
1
catches on the lip of the retainer
.
Chapter 3
Hardware replacement procedures
2
.
3
on the retainer enter the
103

Advertisement

Table of Contents
loading

Table of Contents