Lom Adapter Replacement; Remove The Lom Adapter; Install The Lom Adapter - Lenovo thinksystem SR630 Maintenance Manual
Hide thumbs
Also See for thinksystem SR630:
- Maintenance manual (276 pages) ,
- Product manual (75 pages) ,
- Quick start (2 pages)
Table of Contents
Advertisement
2. Configure RAID information if necessary.
LOM adapter replacement
Use this information to remove and install the LOM adapter.
Remove the LOM adapter
Use this information to remove the LOM adapter.
Before removing the LOM adapter:
1. Remove the top cover. See "Remove the top cover" on page 42.
2. If riser 1 assembly is installed, remove it to access the LOM adapter slot.
To remove the LOM adapter, complete the following steps:
Watch the procedure. A video of the removal process is available:
• Youtube:
https://www.youtube.com/playlist?list=PLYV5R7hVcs-C_GGjNudxYy8-c69INMcmE
• Youku:
http://list.youku.com/albumlist/show/id_50462008
Figure 50. LOM adapter removal
Step 1.
Loosen the thumbscrew that secures the LOM adapter.
Step 2.
Push the LOM adapter out of the connector on the system board.
Step 3.
Slide the LOM adapter backward as shown and lift the LOM adapter out of the chassis.
If you are instructed to return the old LOM adapter, follow all packaging instructions and use any packaging
materials that are provided.
Install the LOM adapter
Use this information to install the LOM adapter.
68
ThinkSystem SR630 Maintenance Manual
Advertisement
Table of Contents
