Lenovo thinksystem SR630 Maintenance Manual page 101

Hide thumbs Also See for thinksystem SR630:
Table of Contents

Advertisement

Figure 82. Rear backplane connectors
Step 3.
Install the air baffle into the rear hot-swap drive assembly as shown.
Figure 83. Air baffle installation
Step 4.
Align the three pins on the rear hot-swap drive assembly with the holes and slot in the chassis.
Then, lower the rear hot-swap drive assembly into the chassis until it is fully seated.
.
Chapter 3
Hardware replacement procedures
93

Advertisement

Table of Contents
loading

Table of Contents