Table of Contents
Advertisement
Figure 68. Air baffle installation
Step 1.
Align the tabs on both sides of the air baffle with the corresponding slots on both sides of the
chassis.
Step 2.
Lower the air baffle into the chassis and press the air baffle down until it is securely seated.
After installing the air baffle, complete the parts replacement. See "Complete the parts replacement" on page
203.
Rack latches replacement
Use this information to remove and install the rack latches.
Remove the rack latches
Use this information to remove the rack latches.
"Read the
installation
Guidelines" on
page 79
Before removing the rack latches:
1. If the server is installed with the security bezel, remove it first. See "Remove the security bezel" on page
99.
2. Use a flat-blade screwdriver to remove the ID label plate on the right rack latch and place it in a safe
place.
ThinkSystem SR635 Maintenance Manual
94
Advertisement
Table of Contents
