Lenovo thinksystem SR630 Maintenance Manual page 114

Hide thumbs Also See for thinksystem SR630:
Table of Contents

Advertisement

Notes:
• For server models with 3.5-inch drive bays, if you have only one RAID super capacitor module, you must
install it in location
1
and
2
.
• For server models with 2.5-inch drive bays, if you have only one RAID super capacitor module, you must
3
install it in location
and
1
.
Figure 100. RAID super capacitor module location
Before installing a RAID super capacitor module on the bottom of the air baffle, touch the static-protective
package that contains the new RAID super capacitor module to any unpainted surface on the outside of the
server. Then, take the new RAID super capacitor module out of the package and place it on a static-
protective surface.
To install a RAID super capacitor module on the bottom of the air baffle, complete the following steps:
Watch the procedure. A video of the installation process is available:
• Youtube:
https://www.youtube.com/playlist?list=PLYV5R7hVcs-C_GGjNudxYy8-c69INMcmE
• Youku:
http://list.youku.com/albumlist/show/id_50462008
106
ThinkSystem SR630 Maintenance Manual
; if you have two RAID super capacitor modules, you can install them in location
; if you have two RAID super capacitor modules, you can install them in location
1
3

Advertisement

Table of Contents
loading

Table of Contents