Table of Contents
Advertisement
1. Connect the RAID super capacitor module to a RAID adapter with the extension cable that comes with
the RAID super capacitor module.
2. Complete the parts replacement. See "Complete the parts replacement" on page 34.
Remove a RAID super capacitor module on the bottom of the air baffle
Use this information to remove a RAID super capacitor module on the bottom of the air baffle.
Chapter 4 "Read
the
installation
Guidelines" on
page 29
Before removing a RAID super capacitor module on the bottom of the air baffle:
1. Remove the top cover. See "Remove the top cover" on page 108.
2. Remove the air baffle. See "Remove the air baffle" on page 45.
To remove a RAID super capacitor module on the bottom of the air baffle, complete the following steps:
Figure 61. Removal of a RAID super capacitor module on the bottom of the air baffle
Step 1.
Gently press the tab on the air baffle as shown.
Step 2.
Remove the RAID super capacitor module from the air baffle.
If you are instructed to return the old RAID super capacitor module, follow all packaging instructions and use
any packaging materials that are provided.
Rack latches replacement
Use this information to remove and install the rack latches.
Install the rack latches
Use this information to install the rack latches.
94
ThinkAgile MX Certified Node 1UThinkAgile MX3321-H, MX3321-FUser Guide
"Power off
the server
for this task"
on page 34
"ATTENTION:
Static Sensitive Device
Ground package before opening"
on page 31
Advertisement
Table of Contents
