Opening The Control Panel - AEMC 8230 User Manual

6.3 Opening the Control Panel

To open the Power Analyzer Control Panel:
• Double-click the PowerPad Icon that was created during installation, located
on the desktop.
• The Connection window will appear:
Make sure that the communication port displayed in the dialog box matches the
port that the serial cable is plugged into. Once the proper communication param-
eters have been specified, click OK.
NOTE: The communication rate is determined automatically by DataView
the 8230 (maximum rate is 115.2 kbps).
When a communication link is established, DataView
the instrument that it is connected to.
Power Quality Analyzer Model 8230
Figure 6-4
will automatically identify
®
and
®
57