Connecting The Instrument To The Pc; Megohmmeter Control Panel; Opening The Control Panel - AEMC 6550 User Manual

The Set-up window remains open. You may now select another option to download (e.g. Adobe
or close the window.
14. Restart your computer.
Shortcuts for DataView and each instrument control panel selected during the installation process have been
added to your desktop.
You can now open the Megohmmeter Control Panel and connect your instrument to the computer.

6.2 Connecting the Instrument to the PC

INSTALL THE SOFTWARE AND DRIVERS BEFORE CONNECTING THE INSTRUMENT TO A PC.
■
Set the switch to any position other than OFF.
■
The data rate must be 38,400 bauds for the instrument (see §5.2) and for the PC.
■
Connect the instrument to the PC using the optical USB cable supplied with the instrument, after
removing the cover that protects the port in the instrument.
When in communication with a PC, the instrument displays "REMOTE" and no longer reacts to the user's com-
mands. The buttons and the rotary switch are inactive, except for stopping the instrument (OFF setting).

6.3 Megohmmeter Control Panel

6.3.1 Opening the Control Panel

To open the Megohmmeter Control Panel:
■
Double-click the Megohmmeter icon that was created during installation, located on the desktop.
■
The Megohmmeter Control Panel window will appear.
For complete information on using the Megohmmeter with DataView, refer to the Help Menu within the
Megohmmeter Control Panel in DataView.
52
Shop for AEMC products online at:
ADJUSTABLE VOLTAGE
50 V
Input voltage
Frequency
Input current
Date 2011.05.24
ShopAEMC
www.
REMOTE
1
0.1 V AC
0.2 Hz
11.56 pA
Time 15:31
Megohmmeter Models 6550/6555
.ca 1.877.766.5412
Reader),
®