Table of Contents
Advertisement
ITEM
FUNCTION
1.
Starting and ending dates and times of the energy calculation.
2.
Value of the energy from the starting date and time up to the cursor position (date and
time of end of calculation).
A long press on the ◄ or ► button causes a shift to rapid motion if the
selected.
•
With the
using the ◄ or ► buttons.
•
With the
ing relevant to the energy measurement. The starting and ending dates are
identical.
•
Select the
•
Move the time cursor using the ◄ or ► buttons. The energy between the
starting date and time and the time cursor (ending date and time) is displayed.
In addition, the corresponding bars of the bar chart turn grey.
NOTE: All of the data in a recording session can be downloaded to a com-
puter using the DataView
The
and
ment and the graph time-scale to be changed.
Power Quality Analyzer Model 8230
tool selected, set the starting date/time of the energy metering
tool selected, select the Wh icon. The screen displays the record-
tool again. The time cursor is now activated.
®
tools allow the integration period of the displayed measure-
Display Averaging Period
2 hours
1 hour
15 minutes
10 minutes
5 minutes
1 minute
20 seconds
5 seconds
1 second
software.
Graph Scale
over 2 1/2 days
over 15 hours
over 10 hours
over 5 hours
over 20 minutes
over 5 minutes
over 1 minute
over 5 days
over 1 hour
tool is
49
Advertisement
Table of Contents
