Opening The Control Panel - AEMC 8220 User Manual

5.3 Opening the Control Panel

To open the Power Analyzer Control Panel:
• Double-click the PowerPad Icon in the folder that was created during
installation, located on the desktop.
• The Connection window will appear (see Figure 5-4).
Make sure that the communication port displayed in the dialog box matches the
port that the serial cable is plugged into. Once the proper communication param-
eters have been specified, click on OK.
NOTE: The communication rate is determined automatically by DataView
the Model 8220 (maximum rate is 115.2 kbps).
When a communication link is established, DataView
the instrument that it is connected to and the Control Panel will open (Fig. 5-5).
Power Quality Analyzer Model 8220
Figure 5-4
Figure 5-5
will automatically identify
®
and
®
51