Table of Contents
Advertisement
5.6 Recording Mode
After a recording is set, the instrument will go into sleep mode (no display) to
save the batteries. The recording will start as programmed. Press any button
other than the ON/OFF button to turn ON the display again. Turning off the Pow-
erPad
Jr. clears the schedule, even if turned on again, the recording will not
®
start.
This mode enables all the parameters previously configured in the setup
to be recorded.
Press the Record mode button -
1
2
ITEM
FUNCTION
1.
Representing the time already elapsed (black zone) with respect to the total time
(white zone) of the recording in progress
2.
Sets the configuration for a new recording (see § 5.6.1)
3.
Displays a recording.
4.
Configures and starts a recording.
5.
Deletes a recording.
6.
Inrush mode (see § 5.7)
44
NEW RECORDING
Set-up
: CONFIG 1
Start
: 02/25/06 10:56
Stop
: 02/25/06 10:57
Period
: 10 min
Name
: T E S T 1
3
4
Figure 5-18
02/25/06 10:26
OK
5
6
Power Quality Analyzer Model 8230
mode
Advertisement
Table of Contents
