Trend; Downloading Data To Database - AEMC 8230 User Manual

Powerpad jr. single-phase power quality analyzer

Table of Contents

6.4.3

Trend

This figure shows a real-time trend of data from the PowerPad

average of waveforms downloaded to the PC. There might be 1 waveform per 2.6

seconds. The data is summarized to 1 datapoint every 10 seconds.

NOTE: More data types are downloaded to a database or spreadsheet than what

is shown on the screen.

6.5

Choose from two ways to download data:

From the Instrument tree view, expand the sections under "Recorded Data

•

from the instrument", then click on a line that describes the recorded data. It

will bring up a window with a graph of the data.

From the Instrument menu, select "Recorded Data" to download the data

•

recorded in the PowerPad

Select the data you want to Download by clicking on the desired tab

(Recordings, Photographs, etc.), then clicking on the file name.

Select "Save" (this may take a few minutes).

Type a name for the downloaded file. In the Save as type drop-down

menu, select either .dvb (saves it as a database to be viewed in Data-

View) or .csv (saves it as a comma delimited file to be viewed in a spread-

sheet), then click "Save".

Alternatively, select "View". After the download is complete, a window will

appear with a graph of the data, and some viewing or channel options. In

that window, you can select "Save", or "Print".

Figure 6-15

Jr.

Jr. The data is an

Power Quality Analyzer Model 8230

Table of Contents