Table of Contents
Advertisement
6.3 Opening the Control Panel
To open the Power Analyzer Control Panel:
•
Double-click the PowerPad Icon that was created during installation, located
on the desktop.
•
The Connection window will appear (see Figure 6-4).
•
Make sure that the serial port displayed in the dialog box matches the port you
plugged the serial cable into. If the correct serial port is not selected, click on
the drop-down menu to select it.
•
The Baud Rate needs to be set at the same rate as the Model 3945-B. The
Baud Rate can be selected from the Communication Rate drop-down menu.
To check the baud rate on the instrument:
•
Turn ON the Model 3945-B by pressing the green button -
•
Press the menu button -
•
Scroll down with the
•
Press the enter button -
•
Set to read 115200
•
When the proper communication parameters have been specified, click OK.
For detailed instructions and descriptions for any feature in a dialog box,
click on the Help Button, or right-click on the feature you want information
about.
Once the communication link is established, DataView
the instrument that it is connected to. The Control Panel will appear:
70
Figure 6-4
button, until you reach "BAUD RATE"
and read the baud rate
Power Quality Analyzer Model 3945-B
will automatically identify
®
Advertisement
Table of Contents
