5.6 Recording Mode
This mode enables all the parameters previously confi gured in the setup
to be recorded (see § 4.1.8).
Press the record display mode button -
The variable function buttons have the following functions in this mode:
5.6.1 Saving the Selected Parameters
1
2
Recording status bar (displays remaining memory capacity).
Parameters - press the
tons to modify them. An underline will appear under the selected parameter.
- Select the confi guration number to be modifi ed with the
(CONFIG 1, 2, 3 or 4)
- Select the dates with the
- Select a recording storage rate using the
- Enter the record name with the
bet and numbers. Up to 7 characters may be entered.
- Save the changes with the
NOTE: The possible storage rates are: 1, 5 or 20 sec; 1, 2, 5, 10 or 15 min
Power Quality Analyzer Model 3945
- Creates a new recording
- Opens a previous recording
- Deletes recording
NEW RECORDING
CONFIGURATION
START
: 07/25/02 10:56
END
: 07/25/02 10:57
PERIOD
: 1 min
NAME
: T E S T
Recording
buttons to select the parameters and the
07/25/02 10:56
: CONFIG 1
Figure 5-19
buttons.
buttons, which scroll through the alpha-
button.
100%
buttons.
buttons.
mode
but-
49