3.3.1
Accumulated counts
With accumulated counts selected via radeye.exe the RadEye
shows the collected counts within the measurement time in place
of the mean value. This option is only available in combination
with measurement unit "cps" and "cpm".
3.4
Background measurement
To enter background measurement select in submenu "Back-
ground" "Start Meas.".
The background measurement starts with the parameter set in
submenu option „Set parameter". To start the measurement, press
the "▲/Info" key. While the measurement is in progress "Exit" is
blinking.
Preset time
Elapsed time
3-16
Action of
▲/Info key
DB-065 E
Iw/Tr/Ff 06.03.2017
Measure-
ment value
Preset count
Accumulated
counts
RadEye B20/-ER