Setting Alarm Thresholds - Thermo Scientific RadEye B20 Operating Instructions Manual

3.6

Setting alarm thresholds

The menu options ,
Rate,
Alarm Count Alarm Activity
and allow the alarm thresh-
Rate
Alarm Dose Alarm Dose
olds to be modified. For this setting, the user has 255 seconds
time. Changing the value is effected by pressing the left (Change)
button if the corresponding "Alarm" is selected:
To change the number, press the "▲/Info" or "▼/On" keys. To
go on to the next digit or to quit the edit mode, menu use "◄" or
"►" key.
Once the last number has been set, quit the editing mode by press-
ing the "Exit"-key. Then, the value set is saved and after 10s the
unit returns to the basic display.
Example:
The count rate alarm threshold must be changed.
Press "Menu" key, and „▲/Info" or
"▼/On" arrow keys until
is selected
Alarm Count Rate
Then enter change menu by press-
ing "Change" key.
Edit value by pressing „▲/Info" or
„▼/On" keys
select digit by left / right keys
Pre unit "k" may be chosen as well.
3-18 DB-065 E RadEye B20/-ER
Iw/Tr/Ff 06.03.2017