4.13
Source test
Source test is started with menu item "Source test" in submenu
"Settings".
Source test starts with the parameters previously set with
radeye.exe. Furthermore it is necessary to set the actual date and
time.
Start the source test without source. The RadEye check the back-
ground value. If the background is lower than 0.15 µSv/h the user
is asked to place the source. High range test is only performed
with RadEye B20-ER.
RadEye B20/-ER
Iw/Tr/Ff 06.03.2017
BTcom cover
active
DB-065 E
4-9