4. Operation
4.1
Audible single pulse indication and finder mode
With the single pulse indication being selected,
of the detector generates a short audible signal emitted by the
beeper.
An audible alarm signal caused by exceeding the alarm threshold is
not given while single pulse indication or finder mode is active.
The single pulse indication must be enabled in the menu.
It is activated and deactivated by two times pressing the "►"or top
button:
RadEye B20/-ER
Iw/Tr/Ff 06.03.2017
Indication of activated
single pulse indication
DB-065 E
each pulse
4-1