Bluetooth - Thermo Scientific RadEye B20 Operating Instructions Manual

7.5.7

Bluetooth

Figure 7-11: Bluetooth
Here the user may configure the BTcom battery cover. The frame
"Device" informs about firmware version, serial number and the
physical address of the BTcom cover (not the RadEye). This in-
formation is only visible, if the RadEye is connected via Blue-
tooth.
The Parameter "Blue LED on" relates to the blue LED at the
backside of the battery cover that shows the connection status.
Setting "Power off at battery low" the BTcom cover powers down
automatically if battery low status is detected to increase battery
life of the RadEye. "Secure connection" uses the PIN code that
can be edited in the right field.
RadEye B20/-ER DB-065 E 7-15
Iw/Tr/Ff 06.03.2017