History - Thermo Scientific RadEye B20 Operating Instructions Manual

Parameters including the selected menu configuration can be
saved with File / Save as... as parameter file (*.cfg). A saved
configuration can be reloaded using the menu File / Open... and
sent to RadEye B20.
7.6

History

Via Options / History the values stored in the RadEye B20 data
memory can be read out, represented in an x/t diagram and saved
to the hard disk of the computer. These data subsequently can be
read in and further processed in a spreadsheet program.
Time interval of History storing can be set from 1s to 43200 s (12
hours). 1600 measurement values can be stored.
The following figure depicts for example the curve of the dose
rate over the last two days at a time resolution of 120 s. Clearly
various levels resulting from different locations and points with
high peaks can be recognized.
The blue line shows the mean values, the red line the maximum
value within the time interval.
If batteries are removed, the time reference is lost. In the diagram
time information is only provided for history values with valid
timing entries.
RadEye B20/-ER DB-065 E 7-17
Iw/Tr/Ff 06.03.2017