Changing Directories And Displaying The Working Directory; Creating Directories - Cisco Catalyst 9400 System Management Configuration Manual

Changing Directories and Displaying the Working Directory

Changing Directories and Displaying the Working Directory
Follow these steps to change directories and to display the working directory:
Procedure
Step 1
Step 2
Step 3
Step 4
Step 5

Creating Directories

Beginning in privileged EXEC mode, follow these steps to create a directory:
Procedure
Step 1
System Management Configuration Guide, Cisco IOS XE Bengaluru 17.4.x (Catalyst 9400 Switches)
370
Command or Action
enable
Example:
Device> enable
dir filesystem:
Example:
Device# dir flash:
cd directory_name
Example:
Device# cd new_configs
pwd
Example:
Device# pwd
cd
Example:
Device# cd
Command or Action
dir filesystem:
Example:
Device# dir flash:
Working with the Flash File System
Purpose
Enables privileged EXEC mode.
• Enter your password if prompted.
Displays the directories on the specified file
system.
For filesystem:, use flash: for the system board
flash device.
Navigates to the specified directory.
The command example shows how to navigate
to the directory named new_configs.
Displays the working directory.
Navigates to the default directory.
Purpose
Displays the directories on the specified file
system.
For filesystem:, use flash: for the system board
flash device.