Create New Fxs Extension; Table 41: Fxs Extension Configuration Parameters->Basic Settings - Grandstream Networks UCM6202 User Manual

Create New FXS Extension

The UCM6200 supports Foreign eXchange Subscriber (FXS) interface. FXS is used when user needs to
connect analog phone lines or FAX machines to the UCM6200.
To manually create new FXS user, go to Web GUI->PBX->Basic/Call Routes->Extensions. Click on
"Create New User"->"Create New FXS Extension" and a new dialog window will show for users to fill in the
extension information. The configuration parameters are as follows.
Table 41: FXS Extension Configuration Parameters->Basic Settings
General
Extension The extension number associated with the user.
Analog Station Select the FXS port to be assigned for this extension.
Configure the CallerID Number that would be applied for outbound calls from this
user. Note:
Caller ID Number
The ability to manipulate your outbound Caller ID may be limited by your VoIP
provider.
Assign permission level to the user. The available permissions are "Internal", "Local",
"National" and "International" from the lowest level to the highest level. The default
setting is "Internal".
Permission
Note:
Users need to have the same level as or higher level than an outbound rule's privilege
in order to make outbound calls using this rule.
Enable Voicemail Enable voicemail for the user. The default setting is "Yes".
Configure voicemail password (digits only) for the user to access the voicemail box.
Voicemail
A random numeric password is automatically generated. It is recommended to use
Password
the random generated password for security purpose.
Skip Voicemail
When user dials voicemail code, the password verification IVR is skipped. If enabled,
Password
this would allow one-button voicemail access. By default this option is disabled.
Verification
If selected, this extension will be disabled on the UCM6200.
Disable This
Note:
Extension
The disabled extension still exists on the PBX but can't be used on the end device.
User Settings
Configure the first name of the user. The first name can contain characters, letters,
First Name
digits and _.
Configure the last name of the user. The last name can contain characters, letters,
Last Name
digits and _.
Email Address Fill in the Email address for the user. Voicemail will be sent to this Email address.
UMC6200 Series User Manual
P a g e | 127