Table 33: Sip Extension Configuration Parameters->Basic Settings - Grandstream Networks UCM6202 User Manual

The configuration parameters are as follows.
Table 33: SIP Extension Configuration Parameters->Basic Settings
General
Extension The extension number associated with the user.
Configure the CallerID Number that would be applied for outbound calls from this
user.
CallerID Number Note:
The ability to manipulate your outbound Caller ID may be limited by your VoIP
provider.
Assign permission level to the user. The available permissions are "Internal", "Local",
"National" and "International" from the lowest level to the highest level. The default
setting is "Internal".
Permission
Note:
Users need to have the same level as or higher level than an outbound rule's privilege
in order to make outbound calls using this rule.
Configure the password for the user. A random secure password will be automatically
SIP/IAX Password
generated. It is recommended to use this password for security purpose.
Configure the authentication ID for the user. If not configured, the extension number
Auth ID
will be used for authentication.
Enable Voicemail Enable voicemail for the user. The default setting is "Yes".
Configure voicemail password (digits only) for the user to access the voicemail box.
Voicemail
A random numeric password is automatically generated. It is recommended to use
Password
the random generated password for security purpose.
Skip Voicemail
When user dials voicemail code, the password verification IVR is skipped. If enabled,
Password
this would allow one-button voicemail access. By default this option is disabled.
Verification
If selected, this extension will be disabled on the UCM6200.
Disable This
Note:
Extension
The disabled extension still exists on the PBX but can't be used on the end device.
User Settings
Configure the first name of the user. The first name can contain characters, letters,
First Name
digits and _.
Configure the last name of the user. The last name can contain characters, letters,
Last Name
digits and _.
Email Address Fill in the Email address for the user. Voicemail will be sent to this Email address.
Configure the password for user portal access. A random numeric password is
User Password automatically generated. It is recommended to use the randomly generated password
for security purpose.
UMC6200 Series User Manual
P a g e | 118