Inbound Routes
Inbound routes can be configured via Web GUI->PBX->Basic/Call Routes->Inbound Routes.
Click on "Create New Inbound Rule" to add a new inbound route.
Click on "Blacklist" to configure blacklist for all inbound routes.
Click on
to edit the inbound route.
Click on
to delete the inbound route.
Inbound Rule Configurations
Trunks
DID Pattern
Figure 110: Country Codes
Table 57: Inbound Rule Configuration Parameters
Select the trunk to configure the inbound rule.
All patterns are prefixed with the "_".
Special characters:
X: Any Digit from 0-9.
Z: Any Digit from 1-9.
N: Any Digit from 2-9.
".": Wildcard. Match one or more characters.
"!": Wildcard. Match zero or more characters immediately.
Example: [12345-9] - Any digit from 1 to 9.
The pattern can be composed of two parts, divided by a '/' character. The
first part is used to specify the dialed number the second part is used to specify
UMC6200 Series User Manual
P a g e
|
167