Table 40: Iax Extension Configuration Parameters->Specific Time - Grandstream Networks UCM6202 User Manual

Ring Simultaneously
Enable this option to have an external number ring simultaneously along with the
Ring
extension. If a register trunk is used for outbound, the register number will be used to
Simultaneously
be displayed for the external number as caller ID number.
Set the external number to be rang simultaneously. '-' is the connection character
External Number
which will be ignored.
Time Condition for
Ring the external number simultaneously along with the extension on the basis of this
Ring
time condition.
Simultaneously
Other Settings
Configure the number of seconds to ring the user before the call is forwarded to
voicemail (voicemail is enabled) or hang up (voicemail is disabled). If not specified,
the default ring timeout is 60 seconds on the UCM6200, which can be configured in
the global ring timeout setting under web GUI->Internal Options->IVR Prompt:
Ring Timeout
General Preference. The valid range is between 5 seconds and 600 seconds.
Note:
If the end point also has a ring timeout configured, the actual ring timeout used is the
shortest time set by either device.
Enable automatic recording for the calls using this extension. The default setting is
Auto Record disabled. The recording files can be accessed under web GUI->CDR->Recording
Files.


Skip Trunk Auth

If "Skip Trunk Auth" is set to "By Time", select a time condition during which users can
Time Condition for
Skip Trunk Auth skip entering password when making outbound calls.
Dial Trunk
Configure personal password when making outbound calls via trunk.
Password
Enable LDAP If enabled, the extension will be added to LDAP Phonebook PBX lists.
Configure the Music On Hold class to suggest to the bridged channel when putting
Music On Hold
them on hold.
Call Duration Limit The maximum duration of call-blocking.
Table 40: IAX Extension Configuration Parameters->Specific Time
Specific Time
Time Condition Click to add Time Condition to configure specific time for this extension.
If set to "Yes", users can skip entering the password when making outbound calls.
If set to "By Time", users can skip entering the password when making outbound
calls during the selected time condition.
If set to "No", users will be asked to enter the password when making outbound
calls.
UMC6200 Series User Manual
P a g e | 126