Figure 83: Modify Selected Devices - Different Models - Grandstream Networks UCM6202 User Manual

Figure 83: Modify Selected Devices - Different Models

--------------------------------------------------------------------------------------------------------------------- -----------------------
Note:
Performing batch operation will override all the existing device configuration on the page.
--------------------------------------------------------------------------------------------------------------------- -----------------------
After the above configurations, save the changes and go back to web UI->PBX->Zero Config->Zero
Config page. Users could then click on to send NOTIFY to the SIP end point device and trigger the
provisioning process. The device will start downloading the generated configuration file from the URL
contained in the NOTIFY message.
P a g e | 111
UMC6200 Series User Manual