Web Info
SSH Switch
By default the SSH access is disabled.
Use The LED Indicators
The UCM6200 has LED indicators in the front to display connection status. The following table shows the
status definitions.
LED Indicator
LAN
WAN
USB
SD
FXS (Phone/Fax)
FXO (Telco Line)
LED
NETWORK
ACT
USB
SD
Phone (FXS)
Line (FXO)
Use The Web GUI
Access Web GUI
The UCM6200 embedded Web server responds to HTTP/HTTPS GET/POST requests. Embedded HTML
pages allow users to configure the device through a Web browser such as Microsoft IE, Mozilla Firefox,
Google Chrome and etc.
Protocol: Web access protocol. HTTP or HTTPS. By default it's HTTPS
Port: Web access port number. By default it's 8089
Enable SSH: Enable SSH access.
Disable SSH: Disable SSH access.
Table 4: UCM6202/UCM6204 LED Indicators
LED Status
Table 5: UCM6208 LED Indicators
LED Status
UMC6200 Series User Manual
Solid: Connected
Flashing: Data Transferring
OFF: Not Connected
Solid: Connected
OFF: Not Connected
Solid: Connected
Flashing: Data Transferring
OFF: Not Connected
P a g e
|
30