The default setting is "Allow All".
If enable "All", users do not need to enter password when making an outbound call.
Skip Trunk Auth
If enable "Follow Me", the call can dial out via follow me without password.
Select audio and video codec for the extension. The available codecs are: PCMU,
Codec Preference
PCMA, GSM, AAL2-G.726-32, G.722, G.729, G.723, iLBC, ADPCM, LPC10, H.264,
H.263, H.263p and VP8.
Search and Edit Extension
All the UCM6200 extensions are listed under Web GUI->PBX->Basic/Call Routes->Extensions, with
status, Extension, CallerID Name, Technology (SIP, IAX and FXS), IP and Port. Each extension has a
checkbox for users to "Modify Selected Extensions" or "Delete Selected Extensions". Also, options "Edit"
, "Reboot"
and "Delete"
specifying the extension number to find an extension quickly.
Status
Users can see the following icon for each extension to indicate the SIP status.
Green:
Free
Blue:
Ringing
Yellow:
In Use
Grey:
Unavailable (the extension is not registered or disabled on the PBX)
Edit single extension
Click on
to start editing the extension parameters.
A Specific IP Address.
Only the device on the specific IP address can register this extension.
are available per extension. User can search an extension by
Figure 90: Manage Extensions
UMC6200 Series User Manual
P a g e
|
136