Trunks; Analog Trunks; Analog Trunk Configuration; Table 47: Analog Trunk Configuration Parameters - Grandstream Networks UCM6202 User Manual

Analog Trunks

Go to Web GUI->PBX->Basic/Call Routes->Analog Trunks to add and edit analog trunks.

Click on "Create New Analog Trunk" to add a new analog trunk.

Click on to edit the analog trunk.

Click on to delete the analog trunk.

Analog Trunk Configuration

The analog trunk options are listed in the table below.
Select the channel for the analog trunk.

Channels


Specify a unique label to identify the trunk when listed in outbound rules, incoming
Trunk Name
rules and etc.
Enable this option to satisfy two primary use cases, which include emulating a simple
key system and creating shared extensions on a PBX. Enable SLA Mode will disable
SLA Mode
polarity reversal.
The barge option specifies whether or not other stations are allowed to join a call in
progress on this trunk. If enabled, the other stations can press the line button to join
Barge Allowed
the call.
The default setting is Yes.
The hold option specifies hold permissions for this trunk. If set to "Open", any station
can place this trunk on hold and any other station is allowed to retrieve the call. If set
Hold Access
to "Private", only the station that places the call on hold can retrieve the call.
The default setting is Yes.
Advanced Options
If enabled, a polarity reversal will be marked as received when an outgoing call is
answered by the remote party. For some countries, a polarity reversal is used for
Enable Polarity
signaling the disconnection of a phone line and the call will be considered as "hangup"
Reversal
on a polarity reversal.
The default setting is "No".

TRUNKS

Table 47: Analog Trunk Configuration Parameters

UCM6202: 2 channels
UCM6204: 4 channels
UCM6208: 8 channels
UMC6200 Series User Manual
P a g e | 143