Power Button/Led Assembly - HP StorageWorks Modular Smart Array 500 Maintenance And Service Manual

Removal and Replacement Procedures

Power Button/LED Assembly

To remove the component:
1. Power down the system. Refer to "System Power Down" in this chapter.
2. Remove the hot-plug SCSI hard drives in bays 10 through 14. Refer to "Hot-Plug SCSI
Hard Drive" in this chapter.
IMPORTANT: To press the plastic latches behind the front bezel, you may choose to use a
flat-head screwdriver.
3. Remove the power button/LED assembly:
1
To replace the component, slide the power button/LED assembly into the bay until it locks
into place.
2-16
HP CONFIDENTIAL Codename: Aurora Part Number: 251850-004 Last Saved On: 9/19/03 10:57 AM
1
HP StorageWorks Modular Smart Array 500 System Maintenance and Service Guide
2