System Events; A.2 System Events - Siemens SIMATIC HMI KTP400 Basic Operating Instructions Manual

Technical Support

A.2 System events

A.2

System events

System events on the HMI device provide information about internal states of the HMI device
and the controller.
Note
System events are only indicated if an alarm window was configured. System events are
output in the language currently set on your HMI device.
System event parameters
System events may contain encrypted parameters which are relevant to troubleshooting
because they provide a reference to the source code of the runtime software. These
parameters are output after the text "Error code:".
Description of the system events
A listing of all system alarms for your HMI device is provided in the online help of your
configuration software.
120
Basic Panels 2nd Generation
Operating Instructions, 10/2016, A5E33293231-AB