Application Information; International Customer Assistance; Safety - adept technology AdeptThree User Manual

Application Information

There is also a dedicated phone line for assistance with applications. For
Applications assistance call (408) 434-5033.

International Customer Assistance

For information on training, service, or applications, Adept also has a
Customer Service Center in Dortmund, West Germany. The phone
number is: 0231-129081.

1.4 Safety

The AdeptThree robot may move at high speed and exert considerable
force. Like all mechanical systems and most industrial equipment, it
must be treated with respect by both the User and the Operator.
This User's Guide should be read by ALL personnel who operate or
maintain AdeptThree systems, or who work within, or near, the workcell.
We also recommend you read the American National Standard for
Industrial Robot Systems-Safety Requirements, published by the RIA, in
conjunction with the American National Standards Institute (ANSI). The
publication, ANSI/RIA R15.06-1986, contains guidelines for robot system
installation, safeguards, maintenance, testing, start-up, and operator
training. The document is available from:
This Guide assumes that the User has successfully completed an Adept
Training Course and has a basic working knowledge of the Adept
system. The User should provide the necessary additional training for
ALL personnel working within or around the workcell.
System Safeguards
Safeguards should be an integral part of robot workcell design, instal-
lation, Operator training, and operating procedures. Adept systems are
computer controlled, and may activate remote devices under program
control at times or along paths not anticipated by personnel. It is critical
This manual follows Robotic Industries Association (RIA)
definitions of "User" as the responsible person or company
and "Operator" as a person who starts, stops, or monitors
robot or workcell operation.
American National Standards Institute
1430 Broadway
New York, NY 10018
NOTE
3