Seat Toledo 2016 Owner's Manual page 132

Raise the armrest until it engages in one of
–
the 5 positions.
Opening storage compartment
Press the button located on the front of the
–
›››
armrest Fig. 144 - .
Lift the storage compartment lid
–
- .
Armrest on rear seats
Rear seats: armrest.
Fig. 145
The armrest can be folded away for greater
comfort using the handle
130
Folding down the backrest
›››
Fig. 144
Fig. 146
Folding
››› Before folding the rear seats, adjust the po-
–
Fig. 145.
sition of the front seats so that the rear
seats are not damaged. When the front
seats are adjusted to the rear position,
their head restraints should be removed
before folding the backrests on the rear
seats. Store the removed head restraints in
Operation
Unlocking the backrest.
such a way that they cannot be soiled or
damaged.
Insert the seat belt latch plate into hole
–
›››
Fig. 146 located on the corresponding
side of the vehicle – safety position.
Press the lock button to unlock the
– B
backrest and fold it forward.
Returning to the initial position
Where the head restraint has been re-
–
moved, insert it into the backrest when par-
tially raised.
Push the backrest backwards to its original
–
position until the lock button engages –
check that it is locked by pulling on the
›››
backrest .
Make sure the red protruding part
–
visible.
WARNING
Once the backrests have been lifted, the
●
seat belts and their buckles must be in their
initial position – ready for use.
The backrests must be safely locked to en-
●
sure any items in the boot cannot move
around the interior of the vehicle in the event
of a sudden braking manoeuvre. Risk of inju-
ries!
Make sure the rear backrests are correctly
●
locked. Only then will the three-point auto-
matic seat belt on the rear central seat work
correctly.
A
is not
C