Seat Toledo 2016 Owner's Manual page 87

Dipped beam headlights
C
Turn signal lights
D
Daylight
E
Changing side light bulbs
Changing side light bulbs.
Fig. 89
Raise the bonnet.
–
›››
Remove the protective cover
–
›››
Remove the bulb holder Fig. 89
–
pulling it outwards.
Remove the bulb by pulling it out and fit
–
the new one.
Installation involves all of the above steps
–
in reverse sequence.
Fit the protective cover. Make sure that the
–
cover fits correctly on the housing during
operation.
Check whether the new bulb is working.
–
Fuses and bulbs
Changing main beam headlight bulb
Changing main beam headlight
Fig. 90
bulbs.
Raise the bonnet.
–
Remove the protective cover.
–
Remove connector
–
outward.
Extract the bulb and fit the replacement so
–
Fig. 89.
that it fits correctly into the recess on the
reflector.
by
1
Installation involves all of the above steps
–
in reverse sequence.
Fit the protective cover. Make sure that the
–
cover fits correctly on the housing during
operation.
Check whether the new bulb is working.
–
Changing dipped beam light bulbs
Fig. 91
bulbs: wheel housing.
›››
Fig. 90 by pulling
1
Fig. 92
bulbs.
Turn the wheel for access to the wheel
–
housing cover and remove the cover
›››
Remove the protective cover from the head-
–
light
Changing dipped beam headlight
Changing dipped beam headlight
Fig. 91.
›››
Fig. 92.
»
85