›››
Unclip the retainer spring
Fig. 112
–
pressing inwards to the right.
Extract the bulb and fit the replacement so
–
that the lug on the base fits into the recess
on the reflector.
Fit the connector.
–
Fit the cover and close the strap. Make sure
–
that the gasket sits well on the casing cover
during the operation.
Check whether the new bulb is working.
–
1)
In headlight versions with LED DRL, this light
source cannot be replaced. It is designed to last the
length of the car's service life. In case of failure, go
to an authorised workshop to have it replaced.
Fuses and bulbs
Turn signal light and DRL(daytime
3
running light)/sidelight
Fig. 113
In the engine compartment: turn sig-
nal light bulb
and DRL (daytime running
1
light) bulb
.
2
Raise the bonnet.
–
Turn the bulb holder
–
the left and pull.
Remove the bulb by pressing on the bulb
–
holder and turning it anticlockwise at the
same time.
Installation involves all of the above steps
–
in reverse sequence.
Changing the fog light bulbs
1)
Front fog light bulb
›››
Fig. 113
or
to
1
2
Fig. 114
Follow the steps indicated:
Front fog light.
»
105