Seat Toledo 2016 Owner's Manual page 50

● Grip the end of the box spanner and turn
the wheel bolt about one turn anti-clockwise
›››
Fig. 62.
Tightening wheel bolts
● Insert the box spanner onto the wheel bolt
as far as it will go 1) .
● Grip the box spanner as close to the end as
possible and tighten the bolt firmly by turn-
ing clockwise.
WARNING
The wheel bolts should only be loosened
slightly (about one turn) before raising the
vehicle with the jack. Risk of accident!
1) The corresponding adapter is required to unscrew
or tighten the anti-theft wheel bolts
48
Lifting the vehicle
Changing a wheel: jack position
Fig. 63
points.
›››
page 47.
The essentials
Fig. 64 Fitting the jack.
To place the jack, locate the jacking point un-
der the door sill closest to the wheel to be
›››
changed Fig. 63. The jacking point is un-
derneath the stamp on the door sill.
● Raise the jack, turning the crank handle to
wind it up under the jacking point until its
claw is directly below the jacking point of the
door sill.